A rainwater tank pump, such as any of the foremost Onga pumps in Australia, is required when you desire to use water from the rainwater tank for your garden and home. It pumps water out of the tank offering pressurized water flow for your garden and home taps. The general requirement for these pumps is to provide water for irrigation, garden, or home use. When choosing a water tank pump for your garden or home, you have to take the following factors into consideration.
Distance between your tank and home
Distance is a factor as you’ll require a water pump of a more powerful multistage type to move water to your home from the tank if the tank’s location is further away or your pipe size is smaller than is recommended, or if your house is multistoried and you desire to get water to the upper floors. Some pumps are pre-labelled as suitable for multi-storey or small homes, but you would generally require a pump that features a head pressure of between 20 and 50 meters to be able to move water upwards, against gravity.
Water pressure
You have to take what you’ll be utilizing the rainwater for and the required water pressure into consideration. The measurement of water pressure is litres per minute (LPM). If your tank water will be used for washing machines and the toilet, then a low flow rate might be okay if you do not mind waiting a few more minutes for the washing machine bowl or toilet cistern to be filled, says a foremost Onga pump supplier in Australia. But if you require water for your showers or even to water the garden, then you will want a pump that’s more powerful which can push water out much faster – about 20 LPM per tap (which is somewhat similar to a mains water tap’s flow rate).
Water pump noise
How active it is and its type are the determinants of the amount of noise a water pump will make. To decrease a free-standing tank pump’s noise, you could build or buy a pump cover to enclose it. A cover functions to safeguard the pump from the natural elements and also muffle the noise. Nevertheless, make sure that the cover is big enough to enable airflow to prevent the pump from overheating. Submersible pumps are placed in the tank and are under the water. This mutes the pump’s noise and saves space.
Energy usage
Though one is tempted to choose the largest, most powerful pump possible, it’s crucial to remember that pumps draw on energy anytime any tap is turned on. The more powerful the pump happens to be, the more the energy it draws. So, purchasing an option that’s too big for your requirements could result in much higher energy bills, thus offsetting any savings from your water bill. To decrease energy usage, target decreasing the number of times you activate your pump. You can do this with a gravity feed system or header tank system setup, or using a pressure tank.
When choosing quality rainwater tank pumps, such as any of the Onga pumps Australia, these are the factors you must consider. Read more: https://www.midwestvalves.com.au/pentair-onga/
