The thermal image camera Sydney is an optical measuring camera that is very precise in measuring temperature. After frequent use, it is important to carry out maintenance. If you fail to maintain and care for your thermal imaging cameras, the quality of images produced will be negatively affected. Read on for tips on how to maintain your thermal imaging device.
Cleaning your thermal imaging device
The first thing you need to do is to clean all the dirt and dust from your infrared camera. If not, there will be too much dust on the equipment to perform correctly. Dust and dirt will affect the sensitivity of your device and once the sensitivity of your camera is affected, it will lose what it should have and that is value. Here are some useful tips for cleaning your camera.
Get a lightly moist cloth and remember that you cannot use all liquids to clean your camera. It should be a non-corrosive solution as the current thermal imager isn’t made of anti-corrosion materials. Under normal circumstances, the cost of corrosion-resistant materials will be too high. Most thermal imaging devices are made of plastic materials. So there is no special cleaning agent required so you can clean it using a mild diluted soap solution. Soap has sterilising effects and will keep your device sterilised.
Don’t wipe the lens of your device with a wet soft cloth. This means that you should avoid putting the cloth directly in your cleaning solution before cleaning the lens of your thermal image camera. If the cloth gets too wet, the excess water will penetrate the camera when wiping the lens.
Wipe the display of your camera gently with a clean cloth. After using your camera, cover the lens of the camera as soon as you can to prevent dust and debris from entering the camera.
Lens Maintenance
The lens of your camera is made of a germanium crystal. This crystal can be easily scratched or broken. You should also remember that LCD screens are susceptible to excess pressure. If you want to protect the lens of your camera, the lens should be covered when it isn’t in use to avoid accidental damage or dust. When the lens needs some wiping, wipe it using a special lens paper. You should never use your hands because your hands will reduce the image quality.
Battery maintenance
During charging, it is normal to notice some heat. Although overcharging your camera will not damage the battery, you should remove the charger when the battery is full. When you use a temperature sensor camera, you should pay attention to the temperature to ensure that the temperature of the camera is stable. If you have doubts about the maintenance of your camera after reading the above content, contact your manufacturer.
Professional cleaning
If the sensor of your thermal image camera Sydney needs cleaning, it is best to contact a professional to clean it for you. Make sure you find a cleaner who is specialised in cleaning cameras similar to yours.
